Product Description
Autel IM608 PRO II (IM608S II)+APB112+G-BOX3 Key Programming Bundle is a comprehensive immobilizer. This key programming bundle is composed of its MaxiIM IM608 PRO II 10.0 Android touchscreen tablet, the XP400PRO key and chip programmer, the wireless JVCI J2534 pass-thru programming device, the APB112 Smart Key Simulator, the G-BOX3 Key Programming Adapter.
Autel MaxiIM IM608 PRO II (IM608S II) with Free G-Box3 and APB112
IM608 Pro II Bundle Package with G-Box3 and APB112 provides far more value and capacities to the IM608 II key programming tool. IMKPA (with 12 adapters for XP400Pro Key & Chip Programmer) enables you to operate Benz ESL_W209 / W906 Data Read/ Write/ Erase, Key Learning, VW/ Audi/ BMW/ Benz Key Unl-ock. When working with GBOX2 & APB112, IM608 II key programmer runs 3x faster speed to finish all IMMO & key programming functions.
Bundle Package Highlights:
1. Global Version. NO IP Blocking Problem
2. This Bundle Package Contains Full Set Autel IM608 PRO II (IM608S II) and G-Box3 and APB112.
3. 2 Years Free Update Online (After 2 Years,
IM608 PRO II Software Subscription Cost 795USD/ Year)
4. IM608 II Provides Powerful Combination of Advanced Key Programming/ All System Diagnostics/ Advanced Maintenance Services
5. IM608 II with Smart Mode for Guided and Automated Key Learning; Expert Mode for Advanced Key Learning
Note:
1. Toyota AKL Programming Is Not Available Any More. Autel Has Removed It According to Toyota Request
2. MaxiIM IM508S is Specifically Designed for Legal Automotive Repairs. This requires users to have legitimate access to the vehicle, either by legally having the vehicle key, or having the vehicle owner's permission using the key
Autel IM608 II IMMO Tool: Best of The Best in Autel MaxiIM Series !
As the upgrade version of Autel IM608 Pro, Autel IM608 II covers 95% of vehicles (2000 later) and allows direct operating key learning & matching via OBD for 85% of vehicles, able to read IMMO DTCs, store IMMO data for the programmed key/chips, perform IMMO ECU reset, adaptation, refreshing, coding and more. Offering two modes for IMMO functions: Smart Mode & Expert Mode, allow users to select based on different situations and needs, thus improve work effoiciency to the maximum.
* Smart Mode: provides guided functions with step-by-step instructions and all you need to do is to follow the instructions and click "Yes" and everything is you need will be completed. This mode is suitable for entry-level technicians or DIYers.
* Expert Mode: accesses to a function menu where each function is separated from each other. Skilled technicians can use this mode to perform single function instead of all function to save time and improve working efficiency.
The Included XP400 Pro Can Extend Its Capability to The Fullest:
(1) Read transponder data (including Mercedes Benz infrared smart key), and generate exclusive keys.
(2) Read/write on-board EEPROM chip data, and read/write MCU/ECU chip data.
(3) Read/write remote control transponder data and detect key frequency.
(4) Read PIN (All Key Lost/Add Key);
(5) Remote Learning / Key Generation / Key Learning
(6) For VW/Audi 4th / 5th Generation IMMO Key Learning; For VW MQB Key Learning via OBD; For VW/Audi/BMW Key Unlock
(7) For Benz 3rd Generation IMMO Add Key, All Key Lost via OBD; For Benz OE NEG Key Learning
(8) For BMW FEM/BDG Key Learning and Adaptation; For BMW CAS4/3/2 Key Learning; For BMW EWS3 Key Learning
(9) Backup / Restore IMMO Data; IMMO ECU Reset / Adaption / Refresh / Coding
What Can G-BOX3 Can Do For You?
* Engine ECU Reading/ Writing for BOSCH MD1/MG1 (VAG, BMW, PSA, OPEL, etc)
* Mercedes-Benz All Keys Lost, Faster Password Calculation
* Mercedes-Benz All Keys Lost, eliminates repeated Insertions within the process
* Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the Electronic Ignition Switch (EIS)
* BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method
* Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors
* Supports on-vehicle and on-bench Fast Mode in an All Keys Lost scenario for Mercedes-Benz vehicles using the DA S3 EIS/EZS.
* Bosch Engine ECU Read and Write on BMW F-chassis, PSA group and Volkswagen MQB vehicles
Autel APB112
The Autel APB112 Smart Key Emulator is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also emulate the vehicle key chip.
* Supports 46, 4D Data Collection
* Supports 46, 4D Data Collection
* Supports 46 Smart Key Password Calculation
* Supports 46 Chip Emulation
* Supports Toyota 4D (94/D4, 98) Smart Key Emulation
* Supports Toyota H (88/A8, A9, 30) Smart Key Emulation
Package List:
1set x Autel IM608 PRO II
1set x Autel G-Box3
1set x Autel APB112
Contact information:
Whatsapp: +86-13429866263
Email: Sales@AuteleShop.com
Join our community: